Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Licencing - Unified Call Manager Version 7.0

LIC-CM7.0-7825=

LIC-CM-DL-10=

There are two licences when one is configuring Unified Call Manager 7.0. Will the system work without the LIC-CM-DL-10? Since I would have bought seat- licences

6 REPLIES
Silver

Re: Licencing - Unified Call Manager Version 7.0

Hi, the first license is for your server (LIC-CM7.0-7825) and the second is for your IP endpoints. Without the second you won't be able to register your phones to the CUCM server. HTH

Hall of Fame Super Red

Re: Licencing - Unified Call Manager Version 7.0

Hi Bongani,

You definately require DLU Licenses to run the IP Phones :)

Seats is related to the Number of Users. DLU's is related to the number, in total, of Devices x DLU/per Device. In CCM 5.x and above IP Phones require DLU's or Device License Units that must be purchased from Cisco;

Device licenses are required for Cisco devices and for third-party devices,with the flexibility to replace third-party devices with Cisco devices. Device licenses are sold in increments of device-license units (DLU's). Device-license units are assigned to each device connected to Cisco Unified CallManager 5.0. Each device is assigned a unit number based on the type and capabilities of the device. Devices with more complex and high-end capabilities are assigned a higher number of units compared to devices with basic capabilities,

From this good Q & A doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item0900aecd805009fc.shtml

Licensing

Application and phone software licenses are enforced. The system manages the maximum number of devices that can be provisioned.

• Each device (Cisco Unified IP phones, third-party devices, and video devices) provisioned in the system corresponds to a number of device license units (DLUs), depending on its capabilities; the total number of units is managed in Cisco Unified CallManager to determine capacity.

• DLUs must be purchased to cover the number of devices connected to Cisco Unified CallManager.

• Third-party SIP devices require DLUs for operation with Cisco Unified CallManager.

Here is the DLU breakdown;

Cisco Unified IP Phone 7902G = 1

Cisco Unified IP Phone 7905G = 2

Cisco Unified IP Phone 7911G = 3

Cisco Unified IP Phone 7912G = 3

Cisco Unified Wireless IP Phone 7920 (no battery) = 4

Cisco Unified IP Conference Station 7936 = 3

Cisco Unified IP Phone 7940G = 4

Cisco Unified IP Phone 7941G = 4

Cisco Unified IP Phone 7941G-GE = 4

Cisco Unified IP Phone 7960G = 4

Cisco Unified IP Phone 7961G = 4

Cisco Unified IP Phone 7961G-GE = 4

Cisco Unified IP Phone 7970G = 5

Cisco Unified IP Phone 7971G = 5

Cisco Unified IP Phone 7985G = 6

Third-party SIP device (basic) = 3 (third-party)

Third-party SIP device (advanced) = 6 (third-party

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmsys/a02licen.html

Here is the DLU Calculator;

http://ciscoknowledgenetwork.com/uc/documents/cm_device_calculator.xls

Hope this helps!

Rob

Silver

Re: Licencing - Unified Call Manager Version 7.0

Don't know how you do it Rob but you're always there with the extra info ;-)

Silver

Re: Licencing - Unified Call Manager Version 7.0

Don't know how you do it Rob but you're always there with the extra info ;-)

Silver

Re: Licencing - Unified Call Manager Version 7.0

Don't know how you do it Rob but you're always there with the extra info ;-)

Hall of Fame Super Red

Re: Licencing - Unified Call Manager Version 7.0

Hi Darren,

Sometimes "less is more" my friend :) +5 points for your ongoing great work here.

Cheers!

Rob

184
Views
10
Helpful
6
Replies
CreatePlease to create content