Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Limit of Route Patterns on CallManager ?

Hi Pros,

Wanted to check, I have around 60 RPs on CallManager. My CCM hardware is MCS7825. (1 Pub, 1 Sub)

Would it cause too much load on it if I add say 10 - 20 more RPs on it ?

I am also creating around 12 - 16 new Partitions & CSS each on it.

Regards,

Pratik

2 REPLIES

Re: Limit of Route Patterns on CallManager ?

It depends on what else do you have on your system.

Maximum Number of Devices per Server Platform:

- MCS-7845 --> 7500

- MCS-7835 --> 2500

- MCS-7825 --> 1000

- MCS-7815 --> 300

Device wights determine the maximum number of physical devices that can be registered to a

CallManager subscriber. Some IP Pone models support multiple lines (directory numbers or

line appearances). Many IPT deployments have directory numbers that are shared across

multiple IP Phones and a large number of dial plan entries that include route patterns;

translation patterns require an extra amout of resources (CPU,memory) on the CallManager.

Dial plan weights provide the limit on the number os fuch dial plan entries configures in

a CallManager subscriber. Dial plan weight calculations provice guidelines to size the

cluster .

Base Dial Plan Weights:

* IP phone device (excluding lne appearances) -- > 5

* Unique line appearance --> 5

* Shared line appearance --> 4

* Route Pattern --> 2

* Translation Pattern --> 1

New Member

Re: Limit of Route Patterns on CallManager ?

What about Partitions & CSS, do they have any weights?

173
Views
8
Helpful
2
Replies
CreatePlease to create content