Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Line Appearance with No Ringing

Is there a way on the CallManager 4.1.3 and or the 7960 to have a line appearance with no ringing. For example 1000(line1) will ring if dialed to from the outside or other extensions but 1001(line2) will not ring if dialed to, all on the same phone. I know the Nortel Meridian System can do this easily, unsure if MCS can.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Line Appearance with No Ringing

Yes, in DN configuration you can set the Ring Setting to Disable or Flash Only.

Hope this helps. If so, please rate the post.

Thanks,

Brandon

2 REPLIES

Re: Line Appearance with No Ringing

Yes, in DN configuration you can set the Ring Setting to Disable or Flash Only.

Hope this helps. If so, please rate the post.

Thanks,

Brandon

New Member

Re: Line Appearance with No Ringing

Works like a charm

Thanks for your help

109
Views
6
Helpful
2
Replies
CreatePlease to create content