Local directory on CIPC 2.0.2 with CCME 4.0

[networking]

Hello,

It's possible to configure the Cisco IP Communicator to list the local directory confgured on the CCME 4.0? On 7906 and 7940/60 the local directory is enabled by default but not in the CIPC.

Is There any way to change the language on the CIPC?

Thank You

Gerard

[d.rocco]

Hi all,

i have the same problem!

Regards

Diego

[d.rocco]

Hi Gerard,

For resolve the issue, put in the ephone configuration mode the line "type CIPC":

!

ephone 8

username "try" password try

mac-address 000F.AAAA.BBBB

type CIPC

button 1:6

!

!

Then, in telephony-service configuration mode put "create cnf-files" command and then reset the phone.

Now, you should find the directory list.

I hope this help you.

Let me know if that works by rating the posts.

[networking]

Hi Rocco,

Thanks for your answer,

I configured all you say without any result. Ip communicator say "Host not found". I noticed that on the "device configuration menu" there are a "directories URL" configured with http://192.168.10.50:80/localdirectory (ccme ip) and as you know, ccme don't have a internal .xml directory file.

May be i have to import the local directory to a .xml file on the flash, but i don't know how to do it.

[d.rocco]

Hi,

This mean that on the router with CME software you have this command (i tested this one too):

___________

telephony-service

url directories http://192.168.10.50:80/localdirectory

___________

Please remove this line with the following command:

telephony-service

no url directories http://192.168.10.50:80/localdirectory

Remember that CCME create an internal Direcotry list with the name command in the ephone-dn configuration; you don't have to define any url directorie line. If you want to personalize your ccme directory list, under telephony-service config, you have to put this command:

directory entry 1 00000000 name John SMith

directory entry 2 11111111 name Cisco Systems

directory entry 3 23456789 name Try&buy

.....

Please let me know.

Diego

[networking]

Hi,

I try to delete the url service line, update de cnf-files and reset the CIPC, but CIPC get it by default. Here is my telephony service config:

telephony-service

load 7960-7940 P0030702T023

load 7914 S00104000100

load 7905 CP7905080001SCCP051117A

load 7920 cmterm_7920.4.0-02-00

load 7912 CP7912080001SCCP051117A

max-ephones 168

max-dn 500

ip source-address 192.168.100.1 port 2000

timeouts interdigit 5

system message CCME

cnf-file perphone

user-locale ES

network-locale ES

time-zone 28

time-format 24

date-format dd-mm-yy

voicemail 1999

max-conferences 24 gain -6

call-forward pattern .T

moh music-on-hold.au

dn-webedit

time-webedit

transfer-system full-consult dss

transfer-pattern .T

after-hours block pattern 1 0906 7-24

after-hours block pattern 2 0905 7-24

after-hours block pattern 3 080 7-24

after-hours block pattern 4 000 7-24

create cnf-files version-stamp 7960 Oct 11 2006 11:24:20

All the ephone-dn are configured with the "name" command.

[d.rocco]

Hi Gerard,

is the same configuration of my CCME.

I give you an extract of my telephony service cfg, and the config of the ip cmmunicator ephone.

_____________

telephony-service

load 7960-7940 P0030702T023

load 7912 CP7912080001SCCP051117A.sbin

max-ephones 24

max-dn 48

ip source-address 10.2.1.18 port 2000

service dnis dir-lookup

cnf-file perphone

user-locale IT

network-locale IT

time-zone 23

time-format 24

max-conferences 8 gain -6

call-forward pattern .T

hunt-group logout HLog

moh music-on-hold.au

multicast moh 239.0.0.1 port 2000

dn-webedit

time-webedit

transfer-system full-consult

transfer-pattern .T

directory entry 1 111111111 name Numero Verde

directory entry 2 222222222 name PostOperatore

directory entry 3 333333333 name Gruppo_SDH

create cnf-files version-stamp 7960 Oct 11 2006 10:56:05

!

ephone 7

mac-address 0014.C2DB.AA4C

mtp

type CIPC

button 1:4

!

!

!

ephone 8

mac-address 000F.B0C6.3AF4

mtp

type CIPC

button 1:6

!

__________

Don't forget to put the "type CIPC" command on the ip communicator ephone config, create again the cnf file and reset the phone.

Hi

Diego

[networking]

Thank you very much for your patience Diego.

May be I need to reload the router or change the ip source-address to data vlan (now the ip source-address is the voice vlan addres)

I noticed on the attached document that you have the CIPC in italian language, how do you change the language?

[thisisshanky]

drocco,

"type CIPC" did help me fix the problem. So here is your 5 points.