I am trying to find out if there is anyway to lock or otherwise secure an IP phone from being used at certain times of the day. Our office has a shared reception and have some worries about the phone their being used by non-company personnel. Ideally some sort of password protection would be useful so the receptionist can lock the phone whenever she is not there, however we could cope if there was a way of setting times for the extension to be active. We use version 3.0(12) of Callmanager (and we are looking to upgrade so if it is something supported in later versions that is an option)
You can use Extension Mobility feature to configure device profiles for users instead of physical phone, so they login using their password and get their permissions and settings. It works on 3.1 version but if you are upgrading the system i would go for the latest 3.3 with all new features. It works for 7940/7960 phones
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...