Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LONG TIME(INFINITE) CALLS

PBX is Connected to Cisco 1751-V via E/M such;

PBX-(E/M)-1751 -- WAN -- 1751-(E/M)-PBX

Some calls continues indefinetely;

How can understand whether this is due to

User forget to hang-on?

E/M line problem?

1751 problem?

Is there any way to cut calls after i.e 30 minutes automatically?

or there no voice traffic on E/M line for a definite time?

This is the call-legs output - It remains the same every time

Total call-legs: 2

C7F : 115042744hs.1 +715 pid:3 Answer 7.... active

dur 16:39:24 tx:13889/275848 rx:8692/170878

Tele 2/0:2883: tx:59964030/172100/0ms g729r8 noise:-61 acom:6 i/0:-61/-79 dBm

C7F : 115043179hs.1 +280 pid:22 Originate 02324612500 active

dur 16:39:24 tx:8656/170158 rx:13889/275848

IP 195.0.10.1:16782 rtt:3ms pl:275620/140ms lost:0/3/7 delay:39/30/70ms g729r8

1 REPLY

Re: LONG TIME(INFINITE) CALLS

Often times complex troubleshooting issues are best addressed in an interactive trouble-shooting session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

100
Views
0
Helpful
1
Replies