cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
286
Views
0
Helpful
2
Replies

loosing RTP (UDP) packages

hmaiwald
Level 1
Level 1

Hi Guys,

I am using a AS5300 (IOS 12.1) as a Voip gateway. Every now and then we run into the problem that the GW is loosing packets. The network is a private LAN and utilization is below 10%. There are no collisions. We have connected a sniffer to the LAN and by looking at the RTP sequence number in the header we can tell that there is a package missing every once in a while.

Is that a known problem? Are there any fixes?

Any input would be appreciated.

Thanks

Heiko

2 Replies 2

jaiello2000
Level 1
Level 1

Check the network in the voice path for duplex mismatches.

In addition for checking the network side I would try to matcvh the packets seqid on the gateway itself, beofre it goes to the LAN.

The command for that is:

debug voip rtp packet

You can narrow diown the debug by entring the remote ip and the remote port

debug voip rtp packet remote-ip 1.1.1.1<16384-32767> RTP port number