PDANet will sometimes uninstall the driver for your native modem on some PCs (not sure why - conflict resolve possibly?). Try reinstalling the driver for the network device you are attempting to use from the control panel
You may need to disable the PDANet device while performing this task.
This should work for most XP stations. We had the issue with a notebook PC and this worked for us. We found a lead on the June Fabrics site, below.
Dori are your users dialing from the Global Address List in Exchange, or are they just using entries from thier contacts? I'm trying to find a way to use the Global Address List without having to copy it to my contacts.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...