Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Maximum no. of calls for VGC

Hi All,

is there possible way to increase the Maximum number of call from 2 to more?

i tried to increase the maximum number but its getting me error, and the message says the maximum no. is just only 2..

can anybody help me?..

Thank you very much in advance..

Best Regards,

Lester

  • Other Collaboration Voice and Video Subjects
1 REPLY
Hall of Fame Super Red

Re: Maximum no. of calls for VGC

Hi Lester,

Unfortunately there is no way around this parameter :( You can configure up to 200 calls for a line on a device in a cluster, with the limiting factor being the device. As you configure the number of calls for one line, the calls available for another line decrease. Cisco IP Phones that support the multicall display (such as a Cisco IP Phone 7960) support up to 200 calls per DN and 2 calls per DN for non-multicall display devices (such as VGC Analog phone or Cisco IP Phone 7905). This is really due to the fact that there is no way to properly handle more than 2 calls at a time on these type of phones.

From this good doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ec5a6.html#1062557

Hope this helps!

Rob

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
100
Views
0
Helpful
1
Replies
This widget could not be displayed.