Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Mc3810 ^ 1750-2V VoFR

Please, what IOS release must I use to configure VoFR between an MC3810 & 1750/2V? I tried different ones but parameters seems to not match between the equipments.

3 REPLIES
Silver

Re: Mc3810 ^ 1750-2V VoFR

Depending on your Memory constraints, anything above 12.1.5T8 should give you all the configuration as well as QoS parameters that you might need. Make sure you choose the right feature set. IP PLUS for 1751 and IP VOICE PLUS for 3810.

Community Member

Re: Mc3810 ^ 1750-2V VoFR

in MC3810, I have the frame-relay interface-dlci XXX VOICE-ENCAP XX, but in 1750, don´t have this command (voice-encap) but hace VOFR (and this command isn´t in the MC3810). How could I match this parameters match in order to perform VoFR calls?

Everything else is working fine (IP & IPX)

Thanks in advnace for your help

Community Member

Re: Mc3810 ^ 1750-2V VoFR

Problem solved

Did a little research on CCO and found the answer (voice-encap in MC3810 and vofr cisco + frame-relay fragmet commands)

Thanks for the help

Hector

93
Views
0
Helpful
3
Replies
CreatePlease to create content