It would be nice if the MCM supported a manual deregisteration. We have a customer that likes to move their systems around and sometimes do not give them long enough to deregister via the time to live value (Pictels is 1800 secs) before they reconnect them. At that point the MCM sees two occurances (the customer plugs into different VLANS) and refuses to register the system. Any chance of seeing that in a future release? Or is there a workaround? We are trying to get Pictel engineering to lower that value.
What's the directly link to Cisco site to download the lastest IOS for Cisco MCM gatekeeper ? And what Cisco platforms will support MCM. We are in the process of testing the gatekeeper and scheduling package for Video over IP in our lab.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...