A Meet-me Conference conference has to be initiated first and then people can join in. So, if you want to have a Meet-me conference to go on forever, you will have to initiate it from a phone and leave it like that.
A good alternate to Meet Me conference is to use MConference. Mconference allows user to intiate a conference bridge from the phone and it will remain up as long as you don't reset the Tomcat server. Users can join and leave the conference as often as they want. Just keep in mind that this is multicast traffic and your network should be able to handle multicast.
MConference is a sample application which allows users to create, join, and control IP multicast conferences from an XML phone service. It's a good example of the power of XML services and IP multicast - providing a large-scale (thousands of
participants), arbitrated conference using a simple web application. Conference arbitration can be enabled/disabled by the conference owner. When arbitration is enabled participants must request permission which is then granted by the conference owner. When conference arbitration is disabled, participants can simply push-to-talk, similar to a hoot-and-holler network.
This application is included with the Cisco IP Phone Services SDK Kit.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...