Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MeetingPlace Express strange problem!

Environment:

MeetingPlace Express 1.1.1.11

CallManager 4.1(3)sr2

Voice Gateway 1: 2821 (c2800nm-advipservicesk9-mz.124-4.T.bin) + VIC2-4FXO

Voice Gateway 2: 2621XM (c2600-advipservicesk9-mz.123-14.T5.bin) + NM-2V + 2* VIC-2FXO

VG1 connect to CallManager using H.323, VG2 connect to CallManager using MGCP

MeetingPlace Express connect to CallManager using H.323.

Problem:

When dial-in from PSTN to VG1 and VG2, both are well; but when using "Find-Me" feature, MeetingPlace express dial to user, users via VG2 are can sent dtmf with MeetingPlace Express, but users via VG1 can not sent any dtmf digit to MeetingPlace Express. So users via VG1 can not enter the meeting.

6 REPLIES
Silver

Re: MeetingPlace Express strange problem!

Try Bug - CSCsc82613

New Member

Re: MeetingPlace Express strange problem!

Hi, this Bug dosen't have any relationship to my issues.

New Member

Re: MeetingPlace Express strange problem!

Have you tried adding 'dtmf-relay h245-alphanumeric' under your voip dial-peer on VG1?

New Member

Re: MeetingPlace Express strange problem!

Following is my VG1 config:

dial-peer voice 5 voip

destination-pattern 6100

session target ipv4:192.168.80.3

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

New Member

Re: MeetingPlace Express strange problem!

We have the same problem with our H.323 Gateway.

Does anyone know a working configuration?

New Member

Re: MeetingPlace Express strange problem!

We had the same issue and made the following changes on the dial peer of the voice gateway:

incoming called-number .T

dtmf-relay h245-alphanumeric

152
Views
0
Helpful
6
Replies