Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Meetingplace Migration from 8.0 > 8.5

my customer is migrating from meetingplace 8.0 to meetingplace 8.5. I am at the stage where i have configured my SSH server (on a windows box) to migrate the data however i am getting Validation Migration Failed. is there any valid documentation or workarounds available? Any info on what needs to be configured on the SSH server side with regards to rSync? has anyone successfully managed this?

Everyone's tags (1)
4 REPLIES
Bronze

Meetingplace Migration from 8.0 > 8.5

Yes the migration works well and I have done it multiple times but for the migration to work you need a rsync server as FTP is no longer supported with MP 8.5.  Many unix servers have this built in so that is what we normally use.  You can also look at Cygwin which has a rsync option though I have not gotten Cygwin to work properly.

John

New Member

Meetingplace Migration from 8.0 > 8.5

so what information I will put it on Remote Archive  ??

anyone knows that ?

===============================================================================
Get Remote Archive Hostname
---------------------------

Type in the new remote archive hostname or IP address, or press enter to use the default.

Hostname (DEFAULT: ): 


===============================================================================
Get Remote Host Username
------------------------

Type in the new remote host username, or press enter to use the default.

Username (DEFAULT: ): admin


===============================================================================
Get Remote Host Password
------------------------

Type in the remote host password.

Password::**********   

===============================================================================
Get Remote Host Password
------------------------

Type in the remote host password.

Re-enter::**********

===============================================================================
Get Remote Archive Pathname
---------------------------

Type in the new remote archive pathname, or press enter to use the default.

Pathname (DEFAULT: ):


===============================================================================
MeetingPlace Migration
----------------------

Migration validation failed. Possible causes include incorrect username and
password, insufficient rights to access and modify the remote directory, and
invalid file transfer protocol. Refer to /tmp/MeetingPlaceUpgradeLog.txt and
Installation and Migration Guide for error information. Installer now exists.

PRESS TO ACCEPT THE FOLLOWING (OK):

Bronze

Meetingplace Migration from 8.0 > 8.5

This is the host name/IP address of the RSS server.

Meetingplace Migration from 8.0 > 8.5

hello ausjustin,

As per this document..

http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/8_5/english/administration/

upgrading_software.html#wp1012333

SNIP from above URL.

About Migrating the Application Server Software

...........

A fresh installation of the Cisco Unified MeetingPlace 8.5 Application Server is required.

The fresh installation reformats the hard disk, and erases all existing information on the

hardware. The migration restore program will restore the legacy Cisco Unified MeetingPlace

data files from the remote backup directory.

.......... 

Hope this helps!

Thanks,

Karthik

849
Views
0
Helpful
4
Replies