Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Messages button not working

Hello,

I have a new install with callmanager 3.3(3)and Unity 4.02 VM only installed. When I press the Messages button I get no response, however if I dial my VM pilot number 8000, Unity will answer.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Messages button not working

When you create the Voice Mail Pilot (Feature-VoiceMail-Voice Mail Pilot) if you have only one Unity Server you can check the option "Make this the default Voice Mail Pilot for the system ", which allows all the phones use this Pilot number and you don't have to assign the phones to a Voice Mail Profile.

Default VM Profile and default VM Pilot number will be used.

3 REPLIES
Gold

Re: Messages button not working

You need to create a Voice Mail Pilot and a Voice Mail Profile to point to it. Then you assign the right Voice Mail Profile to the phone. The reason for this is that you can have multiple Unity servers associated with one CallManager cluster, and you need to tell the individual phones which one they belong to.

In CCM 3.3(3), they are configured under the Feature menu -> Voice Mail -> Voice Mail Pilot, and Voice Mail Profile.

Here is a URL that explains things more in-depth:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008013937c.html

New Member

Re: Messages button not working

When you create the Voice Mail Pilot (Feature-VoiceMail-Voice Mail Pilot) if you have only one Unity Server you can check the option "Make this the default Voice Mail Pilot for the system ", which allows all the phones use this Pilot number and you don't have to assign the phones to a Voice Mail Profile.

Default VM Profile and default VM Pilot number will be used.

New Member

Re: Messages button not working

Thats exactly what I did, Thanks for the help

1179
Views
0
Helpful
3
Replies
CreatePlease login to create content