I am installing a ICS 7750 with Callmanager and have reached the point of adding route patterns. Since this Callmanager will reside in Mexico and enable the users to make calls in Mexico, I will not be able to use the NANP dial plan. Has anyone installed and IP Telephony solution in Mexico and what did you do for route patterns? Thanks for any help
the dial plan feature just makes it easier to determine if the dialed digits are valid. I do not even use this feature. for some reason the voice side of the house likes to provided a fast busy from the pbx when a user dials a not allowed long distance number instead if letting the phone company do it. So we end up creating hudge dial plans in both our callmanager and avaya locations. you should be able to do the the same thing for numbers that are in mexico since you can use varible length dial plans in callmanager. I can not give you an example since the three time that I went to mexico each hotel used different access codes for local calls like most people use 9 here and I not not know how the area/city/exchange code work there but you get the picture.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...