Anyone know of the possibilities, now or future, for running MGCP between CCM and the 7206? MGCP commands are available in the 7206 (we run IOS 12.2(8)T4), but gateway configuration in CCM 3.2 does not include the 7206 as a choice.
The 7206 can not be controlled by ccm via MGCP at this time. I am not sure when it will be supported. If you see the MGCP commands chances are 7206 does support MGCP, but not with the callmanager as a call agent at this time.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...