Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

MGCP Echo Cancellation Coverage

Using a 2821 with a VWIC-2MFT-T1 card controlled via MGCP - Call Manager 4.1.3 (sr1) On the Call Manager Gateway configuration the Echo Cancellation Coverage is "Default" What is or where do I find what the Default value is?

Thanks!

1 REPLY

Re: MGCP Echo Cancellation Coverage

The default is 64ms. You can do a "show voice port" on the gateway to see this information. Please see the following link for confirmation.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122tcr/122tvr/vrg_e1.htm#wp998290

Hope this helps. If so, please rate the post.

Brandon

474
Views
10
Helpful
1
Replies
CreatePlease to create content