Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

mgcp gateway and delay

Hello I am triying to register a mgcp gateway trougth a satellite link with delay between 500 and 600 ms, I have change this parameters but it still don?t register with the ccm:

mgcp request timeout 10000

mgcp request timeout max 40000

mgcp rtp unreachable timeout 3000 action notify

mgcp max-waiting-delay 10000

3 REPLIES
Silver

Re: mgcp gateway and delay

Hi,

Are you sure the rest of your MGCP config and CCM config are ok?

What sort of latency do you have on your satellite link?

Was the gateway tested via LAN connection prior to deployment?

Do you have any QoS for the MGCP signalling?

Checkout "debug ccm-manager"

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a00801a7e83.html#wp1199867

And "debug mgcp"

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a00801aa1f7.html#wp1095777

Cheers,

Tim.

Silver

Re: mgcp gateway and delay

Sorry stupid me didnt read the delay bit above! - 500 - 600 ms is not too bad really.

Cheers,

Tim

New Member

Re: mgcp gateway and delay

Hi thanks, do you know how to increase the time-out to register the gateway with the call manager?.

Best regards, Fran

156
Views
0
Helpful
3
Replies