Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

MGCP Gateway Fax-Relay

I have a CCM 4.1.3, 2651XM and a VG224. The 2651 is configured as a h323 gateway to a PRI Interface. The VG224 is controlled by MGCP (similar to the example: http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t11/faxapp/t38.htm#wp1101237 ). A FAX is connected to port 1.

Now I want to fax to an extern fax. The signaling is ok but no data flows. But you can call with an phone to the fax – number and speak !!!

What can I do ?

Regards

patrick

2 REPLIES
Super Bronze

Re: MGCP Gateway Fax-Relay

Hi

Do you mean that the call starts but the fax fails?

Or that the fax can't dial out?

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Community Member

Re: MGCP Gateway Fax-Relay

Hi,

yes, the call starts, but the fax fails.

i have an attachement for you..

thx

patrick

141
Views
0
Helpful
2
Replies
CreatePlease to create content