Has anyone managed to get CallManager to MGCP control VIC cards that are not in network modules?
I have a Cisco 2851 router with a VWIC2MFT-E1, a VIC4FXS/DID and a VIC2/4FXO.
When I enter gateway configuration in CallManager, it allows me to configure the three NM/EVM slots for MGCP, but not the HWIC slots.
I have configured the 2851 for MGCP.
"show ccm-manager" shows that the gateway sees the callmanagers, but it never succeeds in registering with them.
MGCP Domain Name: Gateway
Priority Status Host
============================================================
Primary Registering with CM 10.1.2.11
First Backup Backup Ready 10.1.2.10
Second Backup None
Here is a sample output from "debug mgcp packets"
*Feb 11 10:16:34.911: MGCP Packet sent to 10.1.2.11:2427--->
RSIP 767772618 *@Gateway MGCP 0.1
RM: graceful
<---
*Feb 11 10:16:34.911: MGCP Packet received from 10.1.2.11:2427--->
200 767772618
<---
*Feb 11 10:16:34.911: [S] mgcp_msg_ack:6059,Updating (*)=10.1.2.11
*Feb 11 10:16:34.911: *:NO-MATCH, 10.1.2.10:2427, 10.1.2.11:2427
*Feb 11 10:16:34.911: aaln/S*/SU*/*:NO-MATCH, 10.1.2.10:2427, 10.1.2.11:2427
*Feb 11 10:16:34.911: aaln/S0/SU*/*:NO-MATCH, 10.1.2.10:2427, 10.1.2.11:2427
*Feb 11 10:16:34.915: aaln/S0/SU1/*:NO-MATCH, 10.1.2.10:2427, 10.1.2.11:2427
*Feb 11 10:16:34.915: aaln/S0/SU1/0:NO-MATCH, 10.1.2.10:2427, 10.1.2.11:2427
*Feb 11 10:16:34.915: aaln/S0/SU1/1:NO-MATCH, 10.1.2.10:2427, 10.1.2.11:2427
*Feb 11 10:16:34.915: aaln/S0/SU1/2:NO-MATCH, 10.1.2.10:2427, 10.1.2.11:2427
*Feb 11 10:16:34.915: aaln/S0/SU1/3:NO-MATCH, 10.1.2.10:2427, 10.1.2.11:2427
I'm guessing that means the Gateway is not registering because CCM is not configured to MGCP control any of the Gateway's voice cards in the HWIC slots.
Has anyone succeeded in getting CallManager to MGCP control VIC cards in HWIC slots?
