In my lab i have one h323 gateway(2611) connected to a mgcp gateway(1760) with pri connection just i want to simulate call flow and also with h323 gateway i connected ccm 3.3 and MGCP connected to CUCM 5.0
i configured required dial peer in h323 and basic mgcp configuration when i simulate the calls from h323 gateway is connected to mgcp gateway and the phone is ringing but from mgcp gateway to h323 iam not able to achieve the same.I dont know what i missed int it, when i given debug isdn q931 in other end router ie destination router (h323) it shows ISDN-6-CONNECT:INTERFACE SERIAL1/0:17 NOW CONNECTED to 8672345 N/A but in the source phone iam not hearing any tone it shows as like ringing but no sound after 6 seconds it produce some engaged sound please try to resolve this Note:iam using IP-Phone in both end
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.