03-24-2003 10:27 AM - edited 03-12-2019 11:11 PM
I need to absolutely know if this will work from someone currently doing it.
We have Unity 4.0.1, CM 3.2.2C with VG200 running 12.2.11 (T3). Integrating with Meridian Mail.
If using MGCP on the CM and the VG200, will AMIS work or must you use H323!!!! We are using AMIS to do VM forwarding as well as hoping to get Long Distance Auth codes back from the Option 81 C so this is transparent to users currently using Nortel phones.
Cisco TAC on 2 occasions has stated that it WILL NOT (D708094,D064185)
But Kechambe has stated that it will using "newer code". Which exactly is newer code? 12.2.13 T is out but now suddenly the VG200 requires 64/16 K to run this new image so was this something built into the new code? Support of more memory on the VG200 as it use to only support a maximum of 32 and 8.
Please help !!!!
03-25-2003 06:36 PM
VG200 using MGCP is on the supported list for use with AMIS as of a month or two ago. See http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/sysreq/40_sysrq.htm#32023.
03-25-2003 07:59 PM
Thank you very much!! This is exactly the hard proof I was looking for!!
05-14-2003 10:37 AM
Please contact me for more information. We have implemented Unity and Meridian Mail in a variety of ways. lets chat off-line, I will need a bit more detail.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide