Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MGCP with PRI ISDN

Someone know how to configure MGCP over 2811 cisco router with interface E1 ISDN PRI with a call agent diferent to call manager ?

2 REPLIES
Green

Re: MGCP with PRI ISDN

This link may help you:

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a00801a7f2c.html#wp1381976

Which is your CallAgent..?

Are you doing Backhaul?

The following link explains how PRI backhaul works and how to configure it on the BTS10200

http://www.cisco.com/univercd/cc/td/doc/product/voice/bts10200/rel_3_5/privar.htm#wp1263406

HTH

New Member

Re: MGCP with PRI ISDN

Thanks

My CallAgent is a softswitch Huawei and I am using backhaul

Te second link http://www.cisco.com/univercd/cc/td/doc/product/voice/bts10200/rel_3_5/privar.htm#wp1263406

do not open with my cco user and password

I do not know if the gateway CISCO is using the rigth channel slot to comunicate with the callagent if boths are using the sema Interface ID

351
Views
0
Helpful
2
Replies