Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Migrating 4.1.3 data to 6.1.2

Hi,

I am having the 4.1.3 callmanager cluster.Now the customer want to have 6.1.2.They purchased the separate server for 6.1.2,while installing the ccm 6.1.2,how to add the 4.1.3 ccm configuration to the new 6.1.2 ccm.

Thanks,

gnan

7 REPLIES
Hall of Fame Super Red

Re: Migrating 4.1.3 data to 6.1.2

Hi Gnan,

Here is the related info for CCM 4.x to CCM 6.1.x to migrate data using the DMA Utility;

Upgrading to Cisco Unified Communications Manager Release 6.1(1) from Cisco Unified Communications Manager 4.x Releases

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/6_1_1/upgrd611-pdf.pdf

Data Migration Assistant User Guide

Release 6.1(1)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/dma/6_1_1/dmaug611-pdf.pdf

When you migrate from Cisco CallManager version 4.(x) to 6.(x), the licenses that are required for existing phones and existing Cisco CallManager nodes is calculated and an intermediate file (XML file) that contains these license counts will be generated during the Cisco CallManager migration process. These licenses are given free of cost because you are already using these phones for Cisco CallManager version 4.x. If you are provisioning new phones and nodes after migrating to Cisco CallManager 6.(x), you need to paste the intermediate license file in the License Registration window on CCO.

Use the following procedure to register existing licenses and request for new licenses.

--------------------------------------------------------------------------------

Step 1 In Cisco CallManager Administration, choose System > Licensing > License File Upload.

The License File Upload window displays.

Step 2 Click View File. A pop-up window displays that has the license information for existing phones and nodes. Copy this information. To copy the contents on this windrow, you can use Ctrl-A (Select All) and Ctrl-C (Copy).

Step 3 On the License Registration window of CCO website, in the text box provided, paste the file contents using Ctrl-V.

Step 4 You must enter the MAC address of the Cisco CallManager server that you are requesting the licenses for, and a valid E-mail Id.

Step 5 To obtain the actual license file, click Submit. A license file is generated.

Step 6 You must upload the license file to the server with the matching MAC address that you provided in Step 4. See the "Uploading a License file" section in the Cisco CallManager Administration Guide. This node takes on the functionality of the license manager.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmsys/a02licen.html#wp1100548

Hope this helps!

Rob

New Member

Re: Migrating 4.1.3 data to 6.1.2

Hi Rob,

Thanks for your reply.I am not going upgrade 4.x to 6.x.Just i am installing the 6.x and i need to take the configuration from the existing ccm4.1.3 cluster and update to the newly installed 6.x.For this how to do the data migration.

Thanks,

gnan.

Hall of Fame Super Red

Re: Migrating 4.1.3 data to 6.1.2

Hi Gnan,

Even with the new build of CCM 6.x you can choose the Windows Migration option. Just run the DMA on the old CCM 4.1(3) before you start and it will produce a .tar file that can be used to move the data across to the new version;

Import Windows Data

This option allows you to import database information from a Cisco Unified Communications Manager 4.x system by using a file that the Data Migration Assistant (DMA) tool produces.

Upgrading the First Cisco Unified Communications Manager Node

When you choose Windows Upgrade, the installation wizard prompts you for the location of the preexisting Windows configuration information that the Data Migration Assistant (DMA) tool created. See the Data Migration Assistant User Guide for more information on the DMA tool.

Step 1 - In the Windows Upgrade window, import data from a Windows version of Cisco Unified Communications Manager by choosing Yes

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/6_1_1/upgrd611-pdf.pdf

Hope this helps!

Rob

New Member

Re: Migrating 4.1.3 data to 6.1.2

Hi Rob, the text that is on the License File Upload must be pasted on the PAK text box on www.cisco.com/go/license ?

Thanks for your time, Jose

Hall of Fame Super Red

Re: Migrating 4.1.3 data to 6.1.2

Hi Jose,

No, not the PAK Text box. Here are some better directions (I hope :)

From here;

https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet

Licenses Not Requiring a PAK

If you do not have a Product Authorization Key (PAK), please click here for available licenses. (use the please click here link)

Available licenses include Evaluation/Demo Licenses, Cisco ASA 3DES/AES, PIX Firewall 3DES/AES and DES Encryption, Cisco Services for IPS, and Cisco Unified Communications Manager Version Upgrade licenses.

Go to;

Voice Products

Then select;

Cisco Unified Communications Manager Device Upgrade License

Here is an overview of the previous info;

Watch out for the note detailed in Step #2 below;

Step 1 After you complete the Cisco Unified Communications Manager upgrade process, navigate to Cisco Unified CallManager Administration and choose System > Licensing > License File Upload.

The License File Upload window displays.

Step 2 Choose the license XML file from the Existing Files drop-down list, and click View File. The window refreshes and displays the information for the selected license. Copy all of the information in this file except the HTML tags. To copy the contents on this window, choose the appropriate text and choose Ctrl-C (Copy).

Step 3 Navigate to the License Registration web tool at https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet

Step 4 Enter the MAC address of the Ethernet 0 NIC of the first node of the Cisco Unified Communications Manager cluster.

Step 5 In the text box that is provided, paste the license file contents that you copied in Step 2 by using the appropriate keyboard shortcuts, such as Ctrl-V.

Step 6 Enter a valid e-mail address and click Continue. A license file generates.

The system sends the license file to you via e-mail using the e-mail address that you provided.

Step 7 You must upload the license file to the server with the matching MAC address that you provided in Step 4. See the "Uploading a License File" section.

Step 8 You can obtain licenses for new devices that you are adding to the upgraded system, if your system requires additional device license units.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/6_1_2/upgrd612.html#wp1495

Have a look at this great tip from Jason;

"when you capture the xml file for the DLUS etc after the upgrade so that you can post it on Cisco's web site, it might be wrapped in HTML. ie the first line and the last line are html, and the license utility will reject it. Remove the first and last line to resolve this."

Hope this helps!

Rob

New Member

Re: Migrating 4.1.3 data to 6.1.2

Clear as the water, thanks for your time Rob.

Hall of Fame Super Red

Re: Migrating 4.1.3 data to 6.1.2

Hi Jose,

You are most welcome my friend :) Glad to be of some small help here.

Take care,

Rob

161
Views
10
Helpful
7
Replies
CreatePlease login to create content