I am getting all 10 digits in my missed calls or received calls. I would like to make call from there by hitting dial in missed calls but it doesnt go through since it needs 9 to dial out is there any way to add 9 or 91 to call directly.
How do you address the issue of missed local vs. missed long distance calls? It seems that if you add a 91 to all incoming calls then you can do a dial on calls as long as they are long distance but what if the call is local? Is there a way to add a 9 to certain area codes that come in and a 91 to anything else?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...