I have just upgraded a 184.108.40.206 to 220.127.116.11 by using the software Cisco Unity 18.104.22.168 Multilingual CD1 from http://www.cisco.com/cgi-bin/tablebuild.pl/unity. All is OK except that the import util and VMO is in the German lanuage. I installed with the UK lanuage. Has any one seen this before?<br><br>
That is a defect (CSCdv23449) which has been reported with ML135. You can copy in the English version of the file.
Here is how to workaround the problem with AVIMPORT (it would also apply to the other localized executable utilities)
Go to Multi\Release\Localize\Import (under Commserver) and take the Avimport.exe for the language you need (in this case ENG) Copy the file Then go to Commserver\Multi\Release\Apps and paste the file there to replace the existing Avimport.exe (the german one in your case)
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...