I work for a company that has a contract with DMDC (Defense Manpower Data Center) and when there is a network outage we initiate a Meet Me Line to get all necessary parties online and working towards a solution. The problem lies in that people are added to the MML as needed to resolve the problem and the person who initiated the MML has to give out a security disclosure stating that sensitive information is not to be discuss on this non-secure line. I am currently running CCM 3.3 My question is: Is there a way for my CCM to do a standard announcement when a caller calls in to the MML? If so how can I set this up? Any help will be greatly appreciated.
There is no option to set this up with CallManager. Only option to play a recording with CallManager is using MoH. So, if there is a way you can introduce a transfer, you could have the users listen to it.
So, you might either want to use a Conf SW like Meetingplace, or invoke a IPCC Script which could also do this (If you have IPCC or IPCC Exp)
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...