Mobile Remote Access Expressway - without internal dns server
I am trying to test MRA using Expressway for a few weeks and All jabbers is fine inside network. but jabbers cannot log-in from outside network.
- CUCM is 9.1 - IM and Presence is 9.1 - Jabber for iPhone is 9.6 - Expressway C and E is 8.2 - A external DNS server only is existed and no internal DNS server. - All SRV and DNS records are on the external DNS Server and same domain is used for internal and external such as example.com.
At the monent, I am wondering if internal DNS server is needed or not.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...