Re: Modify Std. Softkeys

etaggart · ‎06-17-2003

Is there a way to modify the standard softkeys? I'd like to have a softkey on a 7905G speed-dial to a paging system extension. Any help would be greatly apreciated!!!

uversave · ‎06-17-2003

Hi

What version do you have of ccm?

Ullie

etaggart · ‎06-18-2003

I do have 3.3. Is there any way to reprogram them through XML?

dugrant · ‎06-17-2003

With CM 3.3, you can move/remove the softkeys around, but you cannot create your own softkeys.

paul.harrison · ‎06-17-2003

I'm afraid the answer is yes and no.

With CM3.3 you can change the soft keys on 7940 / 7960 layouts. You can not change the layout for 7905 or any other phone.

You could try just building a short dial translation pattern to the paging system, just use any single digit that does not form part of your dial plan. But unfortunately this does mean your going to have one or two mis-dials, just because users are users.

Paul