Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MoH file download

I am trying to download music on hold file from CUCM using sFTP. The thing is that I can not connect to the server using FileZilla or any other software. Is there any additional configuration I must perform on the CUCM to accept sFTP connections?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: MoH file download

Hi There,

Here is a guide that will assist you.

http://pushkarbhatkoti.wordpress.com/2009/01/08/how-to-download-music-on-hold-moh-file-from-ccm5x-6x-7x-server/

HTH, Please rate and solve if so

Regards,

Justin

10 REPLIES
New Member

Re: MoH file download

I tried a dump sFTP server, where I specify only port number to listen to, username, password and Root path.

Then I go to CUCM server and execute

file get activelog mohprep/SampleAudioSource.ulaw.wav,

specify sFTP IP address, port number, username and password, directory to download to and the only thing I get is "Invalid download directory specified." message from CUCM. On the sFTP server in the root directory I can only see a folder named mohrep but nothing in it..

Where is the problem?

Re: MoH file download

Hi There,

Here is a guide that will assist you.

http://pushkarbhatkoti.wordpress.com/2009/01/08/how-to-download-music-on-hold-moh-file-from-ccm5x-6x-7x-server/

HTH, Please rate and solve if so

Regards,

Justin

New Member

Re: MoH file download

I have used it already, thank you

New Member

MoH file download

i use CUCM7. The moh files also could be found in the backup .tar files.

New Member

MoH file download

I used this method successfully today on CUCM version 8.6... thanks!

New Member

got same error on CUCM 8.6.2

got same error on CUCM 8.6.2.22900-9 using software Core FTP mini-sftp-server, on a Microsoft Windows [Version 5.2.3790]

 

admin:file get activelog /mohprep/Mozart-Piano-Concerto-9.alaw.wav
Please wait while the system is gathering files info ...done.
Sub-directories were not traversed.
Number of files affected: 1
Total size in Bytes: 15063910
Total size in Kbytes: 14710.85
Would you like to proceed [y/n]? y
SFTP server IP: 10.201.1.226
SFTP server port [22]:
User ID: cisco
Password: *****

Download directory: /

Invalid download directory specified.

------------------------------

A folder (D:\10.17.134.21\2014-11-07_03-29-30\mohprep) is created on / (D:\) but no file is transferred

-----------------------------

It works great with freeSSHd

New Member

Justin,I get the error

Justin,

I get the error "Invalid download directory specified" as per below:

admin:file get activelog mohprep/MAIN_GREETING_NEW2.g729.wav
Please wait while the system is gathering files info ...done.
Sub-directories were not traversed.
Number of files affected: 1
Total size in Bytes: 14060
Total size in Kbytes: 13.730469
Would you like to proceed [y/n]? y
SFTP server IP: 10.1.33.105
SFTP server port [22]:
User ID: axonex
Password: ******
Download directory: /sftp/moh/

Invalid download directory specified.
admin:

Yet I see an entry created in the moh folder - an IP address folder, with a date/time sub-folder and an mohprep sub-folder in that ... but no moh file !

Any ideas, is this a rights issue on my laptop or a missing step?

THanks

Chris

 

 

 

 

New Member

I just was able to do this

I just was able to do this using freeFTPd using the following steps found on the link:

 

http://bhatkoti.com/2009/01/08/how-to-download-music-on-hold-moh-file-from-ccm5x-6x-7x-server/

Here is my result:

 

admin:file get activelog mohprep/*
Please wait while the system is gathering files info ...done.
Sub-directories were not traversed.
Number of files affected: 36
Total size in Bytes: 73648377
Total size in Kbytes: 71922.24
Would you like to proceed [y/n]? y
SFTP server IP: 172.25.20.190
SFTP server port [22]: 
User ID: test
Password: ****

Download directory: \

....................................
Transfer completed.
admin:

 

The difference here is I used a backslash rather than what everyone is doing above using a forward slash which is causing it to reject the directory.

 

I downloaded the entire MOH directory since I needed all the files in this case.

Thanks this is really helpful

Thanks this is really helpful

New Member

Hi All,

Hi All,

I was about to perform these MoH steps in order to download the file i need (editing purposes), however this file is currently being used in a live environment.  Does this just copy the file or does it actually transfer the file from CUCM?  I definitely do not want to impact business, can anyone confirm/advise?

Any feedback will be greatly appreciated!  

Thank you,

Diana 

17527
Views
15
Helpful
10
Replies
CreatePlease to create content