Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MOH Live Feed - FXO to 3.5mm

Guys I need help. Ill be really grateful.

I am trying to make MoH Live feed work connecting an FXO port to an iPod or any device.

But for some reason we tried using a device from ebay which is this http://www.ebay.co.uk/itm/3-5MM-AUDIO-PLUG-TO-RJ11-CAT5-CABLE-EXTENDER-DEVICE-50M-/330334917421?pt=UK_Sound_Vision_Other&hash=item4ce97ed32d

Does anyone know how to make it work.

Please rate the post Shibly Ibrahim
Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

MOH Live Feed - FXO to 3.5mm

Using an analog E&M port as the live-feed MOH interface requires the  minimum number of external components. You connect a line-level audio  feed (standard audio jack) directly to pins 3 and 6 of an E&M RJ-45  connector. The E&M voice interface card (VIC) has a built-in audio  transformer that provides appropriate electrical isolation for the  external audio source. An audio connection on an E&M port does not  require loop-current. The signal immediate and auto-cut-through commands disable E&M signaling on  this voice port. A G.711 audio packet stream is generated by a digital  signal processor (DSP) on the E&M port.

If you use an FXO port as the live-feed MOH interface, connect the MOH  source to the FXO port using a MOD-SC cable if the MOH source has a  different connector than the FXO RJ-11 connector. MOH from a live feed  is supported on the VIC2-2FXO, VIC2-4FXO, EM-HDA-3FXS/4FXO, EM-HDA-6FXO,  and EM2-HDA-4FXO.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemoh.html#wp1010511

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

MOH Live Feed - FXO to 3.5mm

Using an analog E&M port as the live-feed MOH interface requires the  minimum number of external components. You connect a line-level audio  feed (standard audio jack) directly to pins 3 and 6 of an E&M RJ-45  connector. The E&M voice interface card (VIC) has a built-in audio  transformer that provides appropriate electrical isolation for the  external audio source. An audio connection on an E&M port does not  require loop-current. The signal immediate and auto-cut-through commands disable E&M signaling on  this voice port. A G.711 audio packet stream is generated by a digital  signal processor (DSP) on the E&M port.

If you use an FXO port as the live-feed MOH interface, connect the MOH  source to the FXO port using a MOD-SC cable if the MOH source has a  different connector than the FXO RJ-11 connector. MOH from a live feed  is supported on the VIC2-2FXO, VIC2-4FXO, EM-HDA-3FXS/4FXO, EM-HDA-6FXO,  and EM2-HDA-4FXO.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemoh.html#wp1010511

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

MOH Live Feed - FXO to 3.5mm

Thanks Java.

Please rate the post Shibly Ibrahim
2127
Views
0
Helpful
2
Replies