We are running CM3.1.2c on ICS7750 w/ SPE310s. We have setup MOH and everything was working fine - press hold and the selected source begins. Now it is not working and I do not see any errors and nothing was changed.
Anyone have any pointers for troubleshooting.....? Any help would be appreciated.
Did you change the codec that you were using? Make sure under service parameters for the ip voice media streaming app for default MOH codec you have all the codecs selected. If you click on the MOH server itself does it say it is registered. If it is not you can try reseting the MOH server or stopping and starting the ip voice media streaming app.
If the source you are using is an external CD player - make sure all of the connections are in the proper places - Same thing happened to me, it worked then magically it didn't - turns out somebody decided I had the cables plugged in wrong and changed it.
M - I didnt change any codecs, but will verify that the parameters are set correctly. MOH server is registered. Will resetting MOH or starting and stopping the streaming app effect any callers currently on hold?
G - We are using the supplied Cisco sounds and no external device.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.