Customer is upgrading their Exchange by adding new server to network, moving user mailboxes, and then decomissioning the old Exchange server which is the current partner server of Unity. Is there a preferred sequence on when the partnership (Message Store Config Wizard) should be changed, prior to moving mailboxes or after, or does it really not matter as long as it is done prior to removing the old server. It is Exchange 2000 with about 100 mailboxes.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...