If I move all the mailboxes from one exchange server to the other within an Exchange site do I need to do anything in the Unity to point to the right server that hosts the mailboxes. This new server has a diferent name from the original one.<br><br>Sean Poure<br>NEC-Voice Engineering<br>Sr. Systems Engineer<br>714 4846275<br>
If you're going to be moving a bunch of users, the best thing to do is to take the Unity server off line, move them all and then bring the Unity server back up.
there's nothing special you need to do on Unity to "point" us as the right mailstores sine we query the Exchange directory for the users' mailbox and IT always knows where that user is homed and we get a handle to the right mailstore.
If you don't take Unity off line, however, we will keep that handle to the old mailstore open which screws us AND Exchange up... you don't want to do that. You can move individual users one at a time by logging them out of in DOHPorpTest but if you're moving large numbers of users, it's always best to take Unity all the way off line while you do that.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...