01-07-2009 02:00 PM - edited 03-13-2019 05:58 PM
I have a site trying to do the following:
service-policy output voip
and receives the following error:
priority command is not supported in output direction for this interface
I found that the WS-X6704-10GE doesn't support "priority" queing. So, what line cards will support priority queueing on a CAT 6509? Or is there another way to configure?
01-07-2009 05:38 PM
hi
you can use the following logic
interface TenGigabitEthernet1/1
wrr-queue bandwidth 5 25 20 20 20 5 5
! Sets the WRR weights for 5:25:20:20:20:5:5 (Q1 through Q7)
wrr-queue queue-limit 5 25 10 10 10 5 5
! Allocates 5% to Q1, 25% to Q2, 10% to Q3, 10% to Q4,
! Allocates 10% to Q5, 5% to Q6 and 5% to Q7
wrr-queue random-detect min-threshold 1 80 100 100 100 100 100 100 100
! Sets Min WRED Threshold for Q1T1 to 80% and all others to 100%
wrr-queue random-detect min-threshold 2 1 100 100 100 100 100 100 100
! Sets Min WRED Threshold for Q2T1 to 80% and all others to 100%
wrr-queue random-detect min-threshold 3 80 100 100 100 100 100 100 100
! Sets Min WRED Threshold for Q3T1 to 80% and all others to 100%
wrr-queue random-detect min-threshold 4 80 100 100 100 100 100 100 100
! Sets Min WRED Threshold for Q4T1 to 80% and all others to 100%
wrr-queue random-detect min-threshold 5 80 100 100 100 100 100 100 100
! Sets Min WRED Threshold for Q5T1 to 80% and all others to 100%
wrr-queue random-detect min-threshold 6 80 100 100 100 100 100 100 100
! Sets Min WRED Threshold for Q6T1 to 80% and all others to 100%
wrr-queue random-detect min-threshold 7 80 100 100 100 100 100 100 100
! Sets Min WRED Threshold for Q7T1 to 80% and all others to 100%
wrr-queue random-detect max-threshold 1 100 100 100 100 100 100 100 100
! Sets Max WRED Threshold for Q1T1 to 100% and all others to 100%
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
! Sets Max WRED Threshold for Q2T1 to 100% and all others to 100%
! All other WRED Thresholds remain at their default values (100%
wrr-queue random-detect 4 ! Enables WRED on Q4
wrr-queue random-detect 5 ! Enables WRED on Q5
wrr-queue random-detect 6 ! Enables WRED on Q6
wrr-queue random-detect 7 ! Enables WRED on Q7
wrr-queue cos-map 1 1 1 ! Maps Scavenger/Bulk to Q1
wrr-queue cos-map 2 1 0 ! Maps Best Effort to Q2
wrr-queue cos-map 3 1 4 ! Maps Video to Q3
wrr-queue cos-map 4 1 2 ! Maps Net-Mgmt/Transactional to Q4
wrr-queue cos-map 5 1 3 ! Maps Call-Signaling/MC-Data to Q5
wrr-queue cos-map 6 1 6 ! Maps IP Routing to Q6
wrr-queue cos-map 7 1 7 ! Maps STP to Q7
mls qos trust dscp ! Trusts DSCP
hope this helps
good luck
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide