Can anyone from Cisco comment on when T.37 will be supported on an MRP with a PRi? I was reading the limitations and restrictions for Unity on a 7750 and it said you need an external router that supports T.37. Hopefully the MRP300 will eventually be able to support it. It doesn't make much sense to sell a 7750 to a mid size customer and then tell them they also have to purchase a router. Thanks for any info in advance.
The Unity folks don't actually to the MRP engineering work, so you might not get an answer here on that. There could be people monitoring this forum that know, but you might want to move this post to the IP Telephony forum.
Nope. T.37 isn't supported currently on the MRP300. You should touch base with your Cisco sales rep and let them know. This request has come up before so it's a matter of getting the feedback from the field to drive this feature.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...