You need to install more MTP resources! MTP is mananged through medai resource manager in CCM. You assign media resources, such as MTP, tanscoding, conference bridges, etc, to a media resource group-> media resource list-> then to your gateway. You have to find out what application is calling for more MTP's. The requirement comes when a negotiation is needed between codecs, or a conference is required, etc...
You have software MTP's in CCM when your voice media streaming app service is enable. They are name MTP_XXXXX by default. If you have DSP's, you can configure them for transcoding, conferencing and voice termination, then register with CCM.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...