mulitple exchange 5.5 sites sharing 1 Unity server
We are sharing a Unity server at our home location and I am trying to setup users at a remote location that has an exchange site under the organization and connected with x400 connectors. I can currently only view users that are on my local exchange site.
Any ideas how to view users from a remote site or on how to send them voice mail? I am told this works with exchange 2000 but need to find a workaround for use with exchange 5.5 if possible.
Re: mulitple exchange 5.5 sites sharing 1 Unity server
A single Unity server cannot service subscribers across an Exchange site. Multiple servers within the site are fine, but once you have a site boundary you need two Unity servers. This has to do with limitations of the MAPI implementation by Microsoft (i.e. logging into mailboxes across a site is not accounted for).
You need at least one Unity server per Exchange site.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...