Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Multi-site & gatekeepers

I have some problems with configuration:

Site A consist 2 CCM 3.07 working in cluster. Site B consist only 1 CCM 3.07. In the Site A I have 2 IOS gatekeepers (3660) with HSRP. I don`t want to do anonymous calls through gatekeeper, admission control only. Configuration of my gatekeeper is:

gatekeeper

zone local site_a.a.com a.com 10.250.0.13 - my HSRP address

zone local site_b.a.com a.com

no zone subnet site_a.a.com default enable - Cluster with 2 CCMs in Site A

zone subnet site_a.a.com 10.250.0.1/32 enable

zone subnet site_a.a.com 10.200.0.1/32 enable

no zone subnet site_b.a.com default enable

zone subnet site_b.a.com 10.51.0.1/32 enable - CCM in Site B

zone bw site_a.a.com 1024

zone bw site_b.a.com 1024

zone prefix site_a.a.com 30..

zone prefix site_b.a.com 530..

gw-type-prefix 1#* default-technology

no shutdown

I see 2 CCMs in "show gatekeeper endpoint" command output (Site A primary CCM & Site B CCM) with appropriate H.323 IDs.

What I must do on the CCMs to make a call from Site A to Site B ?

1 REPLY
New Member

Re: Multi-site & gatekeepers

After reviewing your configs they seem to look ok to me.

120
Views
0
Helpful
1
Replies