Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

multiple DS0 groups

I have a situation where I have a T1-CAS trunk wich each DS0 configured as a 2 way trunk. I would like to be able to set up the H.323 gateway such that 5 of the trunk will never be used for outgoing calls. Is it possible to do this by creating multiple DS0 groups and only pointing outgoing dial peers to the second group?

  • Other Collaboration Voice and Video Subjects
1 REPLY
Cisco Employee

Re: multiple DS0 groups

Yes that will work. You will need to include all of the channels you want to use or else the router wont allocate a DSP for them. Build 2 ds0-groups and you will get 2 voice-ports. Then have only a dial-peer for outgoing with a destination pattern. You may want to build a dial-peer for the incoming calls without a destinatinon pattern incase you want to add features like DID to thos voice channels.

148
Views
0
Helpful
1
Replies
This widget could not be displayed.