Are there any settings in Unity which allows me to choose which msg. store server to use when using Cisco Unity Import Tool. (CSV import)<br><br>Need to split users among two exchange servers/stores using a Bulk/Cisco Unity Tool<br><br>Thanks <br><br>
If you're creating new users (i.e. crating new Ad/NT and Exchange accounts from CSV) they will all be created in the container you selected in part 2 setup regardless. There's no way to make it create users in different containers/storage groups at this point. The way to do this currently would be to create them all via CSV in the designated "new user" container and then use the Exchange/ADUC move user function to move them to the server/storage group where you want them.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...