Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Music-On-Hold is not working at internal call

Hi all,

I already cange the MOH file at Telephony-service.

After that change, all of the call coming from outside can hear new MOH but internal call cannot hear that new MOH.

Is there any command to add?

If any, anyone pls guide me.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Music-On-Hold is not working at internal call

Hi Maung,

As you said telephony-service I suposse you are running a CallManager Express, if that is, you should configure multicast, like this:

telephony-service

moh music-on-hold.au

multicast moh 239.0.1.1 port 2000

Try it and see if this is the solution.

Hope this helps,

JC Arias

2 REPLIES

Re: Music-On-Hold is not working at internal call

are you running moh multicast under srst in conjunction with CUCM?

Please remember to rate useful posts, by clicking on the stars below.

Re: Music-On-Hold is not working at internal call

Hi Maung,

As you said telephony-service I suposse you are running a CallManager Express, if that is, you should configure multicast, like this:

telephony-service

moh music-on-hold.au

multicast moh 239.0.1.1 port 2000

Try it and see if this is the solution.

Hope this helps,

JC Arias

286
Views
0
Helpful
2
Replies