Have a 7960 with a 7914 expansion module. I would like a message waiting indicator light if someone left a message on one of the lines configured on my expansion module. I went through the documentation and found that i could add extensions to be notified under MWI(messages option).
The problem is that now when someone leaves a message on the line configured on my expansion module, i get a blinking envolop on my personal line and a MWI.
I would only like a MWI on my personal line and not a blinking envolop if someone left a message on the line configured on the expansion module.
Is there a way i could do that?
is there a relation netween a blinking envolop and a MWI or they work together?
Re: MWI light and the blinking envolop any relation?
This setting is done in CallManager. We are running 3.3. The setting is done on the specific DN (line) for which you want to set MWI. Go to the Message Waiting Lamp Policy and select "Light Only". I believe the prompt refers to the envelope and message "You have voicemail" displayed on the 7960 phone. Then Update and Restart the user's phone.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4