MWI probelm in Unity 2.4.6(161) TSP 7.0 with CM 3.1(4b)
We have about 700 unity subscribers and for few of them the MWI is not showing up, only the envelope will show up next to the extension.
When the new message arrives nothing shows up (envelope or MWI), I have to manually refresh the Message Waiting Indicators (MWIs) button in Unity to show the Envelope next to the extension, but no MWI will show up.
This is happenning for few users and the configuration of those users are same as the rest of the users in Unity and CM.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...