We have two sites with CCMEs and a T1 between them. The main site also has a Unity Connection server. We have SIP MWI Relay to send the MWI to the Remote CCME.
Whenever the T1 goes down and back up, we lose the MWI Relay, and the only way to bring it back up is to manually rip out the mwi-server on the remote site and put it back in the configuration. Is there a way to automate this process more?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...