Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NEC PBX Interaction with Cisco Call Manager

Hi,

We have a new building that we want to connect to our network and thinking of Callmanager to be installed and linking it to our NEC PBX.

Need some pointers on how am I going to go about doing that. Documents and examples will be really appreciated

3 REPLIES
Cisco Employee

Re: NEC PBX Interaction with Cisco Call Manager

Hi!

Here are some documents that might help:

*** NEC 2400 ICS PBX with CallManager using 3640-T1 MGCP Gateway ***

http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_troubleshooting_guide09186a00808b6024.html

*** Cisco Unified CallManager Release 5.0-PBX Interoperability: NEC IPX2400 R15 to a Cisco CMM Using T1-PRI QSIG with MGCP ***

www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/522832nt.pdf

The second link includes info on SW and HW requirements as well as features supported.

*** Cisco Unified CallManager Release 5.0-PBX Interoperability ***

www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/248705nn.pdf

HTH, if it does please rate!

Tere :)

Regards, Tere. If you find this post helpful, please rate! :)
New Member

Re: NEC PBX Interaction with Cisco Call Manager

Thank you very much. This really helps. Anyway our PBX is a NEC NEAX 2000 IVS2. Quite old :(

Thanks

New Member

Re: NEC PBX Interaction with Cisco Call Manager

Hi!

I have to connect CUCM 6.1 con NEC IPX2400 R22. I saw your link, but only talk about Release 15.

Is there a new link to understand how should connect to NEC PBX using Release 22? Thanks!!

414
Views
3
Helpful
3
Replies