Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need config for analog to Vg200 connection

I need to know how to configure a standard flat rate analog business line connection to a VG200. This line is a private line for our CEO and needs to show

up as a second line appearance on his 7960 phone.

From what I can gather this needs to set up as a H.323 gateway so I can use the connection plar command. Is this correct or can this be done using

MGCP. All our phones range from 661-8000 to 8399.

This line number is 629-1590. This line will also have to be shared to four admin assistants. I think I can do that if I can get the line appearance to show up on the first phone. I'musing ios 12.1(5)XM1

on the Vg200. Callmanager is running 3.11

Thanks for any help.

Jack Walker

1 REPLY
Cisco Employee

Re: Need config for analog to Vg200 connection

You can do this using MGCP. I would suggest using 12.1(5)XM4 and you can use the following URL as a config guide.

http://www.cisco.com/warp/public/788/AVVID/cm_mgcp_intro.html

92
Views
0
Helpful
1
Replies