I don't think there is an easy way, you may look intoTDM crossconnect to try and get it into a different TS, but by definition for a PRI the signaling will be on TS24. What exactly are you trying to accomplish?
When using this command in a t1 controller pri-group timeslots 1-24 it will create directly D channel interface Serial1/0/0:23. what im trying to accomplish is to change the 23 to 24 since my telco assign the d channel to 24.
OK, is the first timeslot for the telco numbered as 0 or 1? I have never seen a PRI with the D chan in the second to last timeslot unless it is talking to another PBX af the same model through that PRI.
I bet it is in the last timeslot and the numbering is off. If you configure it as pri-group and do a show isdn status, what is the output?
What kind of switch are you connecting to?
If it is not in the last timeslot, inform your provider to make it a standard PRI by putting the D chan in the last TS(you are the customer)
I have run into this "phaseology" problem a few times with various telcos. We tend to look at the slots as 0-23, where the telco engineers tend view them as 1-24. Most of the time, the telco engineers are aware of these perspective differences and will accommodate for it when you turn up and test the PRI's by simply referring to the "last slot" as the d-channel.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...