Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need to change the Softkey template on a few hundred phones....help!

Is there any way to change the softkey template on multiple phones? I did not see it in the BAT tool.

Thanks,

Rimon

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Need to change the Softkey template on a few hundred phones.

Were using 3.3(2) and I can't see this option in BAT.

However, you could use BAT to configure device pools for each group of phones and then change the softkey template for that device pool. Then reset the phones in that device pool to have the template activated for that pool.

HTH

D

5 REPLIES
New Member

Re: Need to change the Softkey template on a few hundred phones.

.

New Member

Re: Need to change the Softkey template on a few hundred phones.

Are you running 3.3, as i'm sure this option is only available from this version onwards?

New Member

Re: Need to change the Softkey template on a few hundred phones.

Were using 3.3(2) and I can't see this option in BAT.

However, you could use BAT to configure device pools for each group of phones and then change the softkey template for that device pool. Then reset the phones in that device pool to have the template activated for that pool.

HTH

D

New Member

Re: Need to change the Softkey template on a few hundred phones.

Yes! Thank you! This will help me out wuite a bit. Now I have another question, what will happen to 7912s in this group since they do not support the softkey templates. Will they simply not be changed or will this cause some unwanted side effects?

Thanks again David!

New Member

Re: Need to change the Softkey template on a few hundred phones.

Not 100% sure as we don't use the 7912's, but I will test one tomorrow if I can get hold of one.

However, when we enabled Call Back we changed all phones in several device pools that contained 7910, 7940 and 7960 phones. Didn't seem to affect the 7910's which don't support the Call Back feature.

HTH

D

104
Views
0
Helpful
5
Replies
CreatePlease login to create content